Service manual

Page 64 of 151
8-4 Left Crankcase Cover
Left crankcase cover removal
• Release the 2 clamps on the left hand
crankcase cover ducts, and then remove the
ducts.
• Remove the left crankcase cover. (9 bolts)
• Remove the 2 dowel pins and the gasket.
Left crankcase cover installation
• Reinstall left crankcase cover in the reverse
order of removal.
8-5 Drive Belt
Removal
• Remove the left hand crankcase cover.
• Hold the drive face with a universal holder
• Remove nut and drive face.
• Special Tool: Universal holder
• Hold the clutch outer with the universal
holder, and remove the nut, bearing stay
collar, and clutch outer.
• Using special service tools for tightening or
loosening the nut.
Copyright ©2008-2009 ETON America, llc., all rights reserved.
www.Get2itParts.com
www.Get2itParts.com
www.Get2itParts.com