Service manual

Page 52 of 151

• Install the cam chain onto the sprocket and align the

timing mark on the sprocket with that of cylinder

head.

• Align the sprocket bolt hole with the camshaft bolt

hole.

• Tighten the sprocket mounting bolts.

• Install the cylinder head side cover (3 bolts).

• Install the thermostat (2 bolts).

• Loosen the auto tensioner adjustment bolt and

remove the bolt and spring.

• Install the tensioner and install the spring and

adjustment bolt.

• Install cylinder cover (4 bolts).

Tensioner

adjustment

bolt

Thermostat

bolts