Service manual

Page 41 of 151
6-4 Cylinder Head Removal
• Remove the engine. (Refer to chapter 5)
• Remove the inlet pipe (2 nuts).
• Remove the 2 thermostat bolts and then remove
the thermostat.
• Remove the cam chain tensioner bolt and relax the
cam chain
• Loosen the bolts, and then remove the tensioner
• Remove Air Injection system (AI) pipe
mounting bolts.
• Remove the spark plug.
• Remove the side cover mounting bolts of
cylinder head, and then take out the side cover.
Tensioner bolts
Thermostat Bolts
Spark plug
Copyright ©2008-2009 ETON America, llc., all rights reserved.
www.Get2itParts.com
www.Get2itParts.com
www.Get2itParts.com