Service manual

Page 37 of 151
5-10 Air Cleaner
Removal
• Loosen the air cleaner and carburetor clamp.
• Remove the vapor hose.
• Loosen the air cleaner clamp, and then
remove the air cleaner vapor hose.
• Remove the air cleaner (4 clips)
Installation
• Install the tank in the reverse order of removal.
Cleaning air cleaner element
• Remove the air cleaner cover (4 latches).
• Remove the element mounting screw.
• Loosen the air cleaner element clamp strip,
and then remove the air cleaner element.
• Clean the element with non-flammable or
high-flash point solvent and then squeeze
out the excess fluid.
• Let it dry.
Caution
Never use gasoline or acidic solvent to
clean the element.
• Soak the element in clean engine oil and
squeeze out the excess fluid.
• Install the element onto the element seat.
• Install the air cleaner cover
.
Fuel tank bolts
Element mounting
screw
Element clamp
Copyright ©2008-2009 ETON America, llc., all rights reserved.
www.Get2itParts.com
www.Get2itParts.com
www.Get2itParts.com