Service manual

Page 32 of 151

5-6 Throttle Valve

Disassembly

• Unscrew the carburetor cap to gain access to the

throttle cable, slide, and needle.

• Remove the throttle slide and throttle cable.

• Disconnect the throttle cable from the

throttle slide and remove the valve spring.

• Remove the fuel needle clip and fuel

needle.

Assembly

• Place the fuel needle onto the throttle slide

and clip it with the needle clip.

• Install the sealed cap, carburetor cap, and

throttle valve spring.

• Connect the throttle valve cable to the

throttle slide.

• Install the throttle slide into the carburetor

body.

Caution

Align the groove inside the throttle valve with the

throttle stopper screw of the carburetor body.

• Reattach the carburetor cap.

• Adjust the free play of throttle valve cable

Carburetor Ca

Throttle

Clip

Carburetor

Cap