Service manual

Page 144 of 151

• After loosening these three screws, find the wire

connector.

• Detach the connector to replace the electrical bulb

conveniently and safely.

• Installation is in the reverse order of removal.

TAILLIGHT

• The taillight combines a positional and a rear

brake light.

• Normally, when users switch the key to “ON”

position, the front & rear positional lights are

always slightly illuminated.

• When the brake lever on the handlebar is

depressed, the rear positional light becomes

brighter.

Rear Brake Light Removal

• The cap is visible on the back of the brake light.

• Loosen the two screws on the cap to remove it.

• Turn the light bulb inside to remove it.