Service manual
Page 137 of 151
16.2 REAR FENDERS REMOVAL
• There are two seat release bars located at the
right and left hand side of the seat.
• Use these to remove the seat first.
• Remove the rear rack.
• Loosen the four bolts which connect the front
fender and rear fender.
• Loosen the two screws which connect the rear
fender and frame. These two bolts are just
below the seat.
• Loosen the three screws which connect the
footrest plate.
• Pull the rear fender backward.
• Remove the two screws on the top of the seat
compartment.
Bolts
Screws
Copyright ©2008-2009 ETON America, llc., all rights reserved.
www.Get2itParts.com
www.Get2itParts.com
www.Get2itParts.com