Service manual

Page 124 of 151

14.3 FRONT WHEELS

REMOVAL

• Raise the front wheels off the ground by placing

a jack or other support under the frame.

• Remove the front wheel nuts, washer, and

wheels.

INSTALLATION

• Install and tighten the four-wheel nuts

• Torque: 24 N.m (17.7 lbf.ft)

• Remember to put a cotter pin in the castle nut.

14.4 HYDRAULIC BRAKE

• This applies to the two front brakes of the unit.

REMOVAL

• Raise the front wheels off the ground by placing

a jack or other support under the frame.

• Remove the front wheel nuts, washer, and front

wheels.