Service manual

Page 120 of 151

13.4 THROTTLE HOUSING

DISASSEMBLY

• Loosen the screws on the throttle housing cover.

• Remove throttle housing cover and gasket.

• Disconnect throttle cable from the throttle arm and

remove from the throttle housing.

13.5 STEERING SYSTEM

Removal of Kingpin and Tie-rod

• Remove the front wheels and hub assembly.

• Remove the four self-lock nuts from the tie-rod ball joints and take off the two tie-rods.

Tie-rod Inspection

• Inspect the tie-rod for damage or bending.

• Inspect the ball joint rubbers for damage, wear,

or deterioration.

• Turn the ball joints with fingers. The ball joints

should turn smoothly and quietly.

Nut

Tie rod