Service manual

Page 119 of 151

INSTALLATION

• Put the handlebar on the lower holders.

• Make sure the handlebar punch marks match

with the top end of the handlebar of lower

holders.

• Install the handlebar upper holders with the L or

R marks facing forward.

• Tighten the forward bolts first, and then tighten

the rear bolts.

• Install the handlebar upper holder’s cover.

• Install the switch housing, aligning the small dot

of the handlebar.

• Tighten the upper screw first, and then tighten

the lower one.

• Install the rear brake lever bracket, aligning the

small dot of the handlebar.

• Tighten the screw securely.