Service manual

Page 109 of 151

• Loosen the radiator 4 bolts.

• Remove the coolant upper side pipes.

• Remove coolant outlet pipe.

• Disconnect the couplers for the thermo switch

and fan motor.

• Remove the radiator and cooling fan.

Disassembly

• Loosen the 3 bolts from the fan duct.

• Remove the fan duct.

• Loosen 3 screws from the fan motor.

• Remove the fan motor.

• Remove the nut to remove the fan from the

fan motor.

Assembly

• Install the fan motor onto the fan duct and

insert the fan into the motor shaft.

• Apply a coat of adhesive to the shaft thread of

the motor.

• Install the washer and the lock nut.

• Tighten the fan duct onto the radiator with 3

bolts.

• Liquid packing must be applied to the thermo

switch before installation to avoid damaging

the radiator.

Installation

• Install the removed parts in the reverse order of removal.

• Install the radiator in the reverse order of removal.