Service manual
Page 108 of 151
Reserve Tank Inspection
• Remove the front center cover.
• Remove the reserve tank filler cap.
• Check the liquid level in the reservoir under the
front right fender. Add coolant to the proper
level if too low.
• Reinstall the reserve tank filler cap.
12-6 Radiator
Inspection
• Remove the front center cover, side covers, and
front fender.
• Check for any leaking from the welded seam.
• Blow the radiator clean using compressed air. If
the radiator is blocked by dirt or foreign
material, use a low pressure water jet to clean it.
• Be careful when straightening the sink fan.
Removal
• Place a water pan under the water pump.
• Loosen the drain bolt to drain out the coolant.
• Remove the coolant filler pipe.
Filler coolant hose
Upper
Lower
Copyright ©2008-2009 ETON America, llc., all rights reserved.
www.Get2itParts.com
www.Get2itParts.com
www.Get2itParts.com