MSDS

ManualsBrandsEton ManualsTools & HardwareBoost Turbine 2000 mAH SmartPhone Backup Battery

Li-Polymer Battery

Date of issue:September 20, 2012

Material Safety Data Sheet

Hongfu Industry Park, HuaRong Rd, Dalang, Longhua Town, Bao'An

District, Shenzhen

Model/type reference ......................: 492098

Nominal Voltage……………………..: 3.7V

Typical Capacity…….......…………..: 1000MAH (3.7Wh)

Compiled by (name+ signature) ....: ChenYun

Approved by (+ signature) .............: sea.wang

Section 1- Chemical Product and Company Identification

Product Identification: Li-Polymer Battery

Model:

492098

Hongfu Industry Park, HuaRong Rd, Dalang, Longhua Town, Bao'An District,

ShenzhenChina

Telephone number of the supplier: +86-755-28141027

Fax: +86-755-28030808

Preparation Date:September 20, 2012

Item Number: 2012092002

Referenced documents: ISO 11014:2009 Safety data sheet for chemical products

Section 2 – Hazards Identification

Preparation

hazards and

classification

Not dangerous with normal use. Do not dismantle, open or shred

Li-Polymer

Battery. Exposure to the ingredients contained within or their combustion

products

could be harmful.

Apperance,

Color, and

Odor

Solid object with no odor, no color.

Primary

Route(s) of

Exposure

These chemicals are contained in a sealed stainless steel enclosure.

Risk of

exposure occurs only if the cell is mechanically, thermally or electrically

abused to

深圳邦凯新能源股份有限公司

Shenzhen B&K Rechargeable Battery,Inc.

Summary of content (9 pages)

PAGE 1
Li-Polymer Battery Date of issue:September 20, 2012 深圳邦凯新能源股份有限公司 Shenzhen B&K Rechargeable Battery,Inc. Material Safety Data Sheet Hongfu Industry Park, HuaRong Rd, Dalang, Longhua Town, Bao'An District, Shenzhen Model/type reference ......................: 492098 Nominal Voltage……………………..: 3.7V Typical Capacity…….......…………..: 1000MAH (3.7Wh) Compiled by (name+ signature) ....: ChenYun Approved by (+ signature) .............: sea.
PAGE 2
the point of compromising the enclosure. If this occurs, exposure to the electrolyte solution contained within can occur by Inhalation, Ingestion, Eye contact and Skin contact Potential Health Effects: ACUTE (short term): see Section 8 for exposure controls In the event that this battery has been ruptured, the electrolyte solution contained within the battery would be corrosive and can cause burns. Inhalation: Inhalation of materials from a sealed battery is not an expected route of exposure.
PAGE 3
(CoO2.Li) Graphite(C) 20% 7782-42-5 Electrolyte 15% Aluminium plastic film 5% N/A PCB 5% N/A N/A Labeling according to EC directives. No symbol and risk phrase are required. Note:CAS number is Chemical Abstract Service Registry Number. N/A=Not apply. Section 4 – First-aid Measures Inhalation If contents of an opened battery are inhaled, remove source of contamination or move victim to fresh air. Obtain medical advice.
PAGE 4
vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Have victim rinse mouth with water again. Quickly transport victim to an emergency care facility. Section 5 – Fire-fighting Measures Flammable Properties In the event that this battery has been ruptured, the electrolyte solution contain within the battery would be flammable.
PAGE 5
emergency procedures Wear adequate personal protective equipment as indicated in Section 8. Environmental Precautions Prevent material from contaminating soil and from entering sewers or waterways. Methods and materials for Containment Stop the leak if safe to do so. Contain the spilled liquid with dry sand or earth. Clean up spills immediately. Methods and materials for cleaning up Absorb spilled material with an inert absorbent (dry sand or earth).
PAGE 6
cool, dry place. Personal Protective Equipment Respiratory Protection: Not necessary under normal conditions. Skin and body Protection: Not necessary under normal conditions, Wear neoprene or nitrile rubber gloves if handling an open or leaking battery. Hand protection: Wear neoprene or natural rubber material gloves if handling an open or leaking battery. Eye Protection: Not necessary under normal conditions, Wear safety glasses if handling an open or leaking battery.
PAGE 7
Odout threshold Not available. Evaporation rate Not available. Flammability (soil, gas) Not available. Viscosity Not applicable Section 10 - Stability and Reactivity Stability The product conditions. is stable under normal Conditions to Avoid (e.g. static discharge, shock or vibration) Do not subject Li-Polymer Battery to mechanical shock. Vibration encoutered during transportation does not cause leakage, fire or explosion. Do not disassemble, crush, short or install with incorrect polarity.
PAGE 8
General note: Water hazard class 1(Self-assessment): slightly hazardous for water. Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
PAGE 9
Transport fashion: Land transport ADR/RID (cross-broder) Sea transport IMDG Air transport ICAO-TI and IATA-DGR Li-Polymer Battery according to NEW PACKING INSTRUCTION 965-967 of IATA DGR 53RD Edition of transportation. Section 15 - Regulatory Information OSHA hazard communication standard (29 CFR 1910.1200) ____________ Hazardous ______V________ Non-hazardous Section 16 - Other Information the information above is believed to be accurate and represents the best information currently available to us.