User Manual

EN 15
Failure Problem Solution
The LED does not
come on when unit is plugged
in.
No power supplied. Check to see if plug is
secured tightly in outlet and
that outlet is working.
The Cooking Mode Indicator
comes on, but heating does
not start.
High temperature of the hob. Ambient temperature may
be too high. Air intake or Air
Vent may be blocked.
Heating stops suddenly
during operation and you hear
a beep every second.
Pan type is wrong. Use the proper pots and
pans.
Pot diameter is too small.
In case of an operation failure or if the faults / error indication does not disappear,
disconnect the cooking hob from the power mains for a few minutes (undo the fuse or
turn of the main switch); then, reconnect it to the power mains and turn on the main
switch key. If the problems persist, call a service technician.
TROUBLESHOOTING