User guide

43
Etisalat HSPA WiFi Router USER GUIDE
Test Description
ENET Connection
Pass: Indicates that the Ethernet interface from your computer is connected to the
LAN port of this Router.
Fail: Indicates that the Router does not detect the Ethernet interface on your
computer.
Wireless connection
Pass: Indicates that the wireless card is ON.
Down: Indicates that the wireless card is OFF.
Ping Default Router
Pass: Indicates that the Router can communicate with the first entry point to the
network. It is usually the IP address of the ISP’s local Router.
Fail: Indicates that the Router was unable to communicate with the first entry point
on the network. It may not have an effect on your Internet connectivity. Therefore
if this test fails but you are still able to access the Internet, there is no need to
troubleshoot this issue.
Ping Primary Domain
Name Server
Pass: Indicates that the Router can communicate with the primary Domain Name
Server (DNS).
Fail: Indicates that the Router was unable to communicate with the primary Domain
Name Server (DNS). It may not have an effect on your Internet connectivity. Therefore
if this test fails but you are still able to access the Internet, there is no need to
troubleshoot this issue.
8.2 System Log
This function allows you to view system events and configure related options. Follow the steps below to enable
and view the System Log.
1: Click Configure System Log to continue.
2: Select the system log options (see table below) and click Save/Apply.
•
•
Status