User guide

37
Etisalat HSPA WiFi Router USER GUIDE
Advanced
6.4.2 Static Route
The Static Route screen displays the configured static routes.
Click the Add or Remove buttons to change settings.
Click the Add button to display the following screen.
Enter Destination Network Address, Subnet Mask, Router IP Address and/or WAN Interface. Then click Save/
Apply to add the entry to the routing table.
6.4.3 Dynamic Route
To activate this option, select the Enabled radio button for Global RIP Mode.
To configure an individual interface, select the desired RIP version and operation, followed by placing a check
in the Enabled checkbox for that interface. Click Save/Apply to save the configuration and to start or stop
dynamic routing.
6.5 Domain Name Servers (DNS)
6.5.1 DNSServerConguration
If the Enable Automatic Assigned DNS checkbox is selected, this device will accept the first received DNS
assignment from the Wide Area Network (WAN) interface during the connection process. If the checkbox is not
selected, a field will appear allowing you to enter the primary and optional secondary DNS server IP addresses.
Click on Save to apply.
NOTE: ClicktheSavebuttontosavethenewconguration.Tomakethenewcongurationeffective,rebootyour
Router.