User guide

36
Etisalat HSPA WiFi Router USER GUIDE
Advanced
Incoming IP Filter
The default setting for all Incoming traffic is BLOCKED. Under this condition only those incoming IP packets
that match the filter rules will be ACCEPTED.
To add a filtering rule, click the Add button. The following screen will display.
Please refer to the Outgoing IP Filter table for field descriptions.
Click Save/Apply to save and activate the filter.
6.4 Routing
Default Router, Static Route and Dynamic Route settings can be found in the Routing link as illustrated
below.
6.4.1 Default Router
If the Enable Automatic Assigned Default Router checkbox is selected, this device will accept a default
Router assignment. If the checkbox is not selected, a field will appear allowing you to enter the static default
Router and/or WAN interface, then click Save/Apply.
NOTE: After enabling the Automatic Assigned Default Router, you must re-boot the Router to activate the
assigned default Router.