User guide

35
Etisalat HSPA WiFi Router USER GUIDE
Advanced
6.3 Security
Your Router can be secured with IP Filtering or Parental Control functions.
6.3.1 IP Filtering
The IP Filtering screen sets filter rules that limit incoming and outgoing IP traffic. Multiple filter rules can be
set with at least one limiting condition. All conditions must be fulfilled to allow individual IP packets to pass
through the filter.
Outgoing IP Filter
The default setting for Outgoing traffic is ACCEPTED. Under this condition, all outgoing IP packets that match
the filter rules will be BLOCKED.
To add a filtering rule, click the Add button. The following screen will display.
Options Description
Filter Name
The filter rule label
Protocol
TCP, TCP/UDP, UDP or ICMP
Source IP address
Enter source IP address
Source Subnet Mask
Enter source subnet mask
Source Port
(port or port:port)
Enter source port number or port range
Destination IP address
Enter destination IP address
Destination Subnet Mask
Enter destination subnet mask
Destination port
(port or port:port)
Enter destination port number or range
Click Save/Apply to save and activate the filter.