User guide

28
Etisalat HSPA WiFi Router USER GUIDE
5.2.2 IP Address
The IP Address option limits local access by IP address. When the Access Control Mode is enabled, only the IP
addresses listed here can access the device. Before enabling Access Control Mode, add IP addresses with the Add
button.
On this screen, enter the IP address Subnet Mask and the different interface for which you wish to allow permission.
Click Save/Apply to continue.
5.2.3 Passwords
The Passwords option configures your account access password for your Router. Access to the device is limited
to the following three user accounts:
admin is to be used for local unrestricted access control
support is to be used for remote maintenance of the device
user is to be used to view information and update device firmware
Use the fields illustrated in the screen below to change or create your password. Passwords must be 16
characters or less with no spaces. Click Save/Apply to continue.
•
•
•
Management