User guide
15
Etisalat HSPA WiFi Router USER GUIDE
NOTE: Sections 8.3 and 8.4.2 also provide information about the Etisalat service.
3.1 HSPA/3G Settings
Select your HSPA/3G settings according to predefined or custom profiles.
Setup instructions are provided in the following sections for your assistance.
3.1.1 ProleSetup
Etisalat will provide the information required to complete the first time setup instructions below. Only complete
those steps for which you have information and skip the others.
1. If your SIM card is not inserted into the Router, please turn the Router off. Then insert the SIM and
turn the Router on.
2. To connect to Etisalat’s 3G network, please select the Etisalat profile with Etisalat’s APN as
etisalat.ae. Authentication Method should be provided by Etisalat; or just leave it AUTO if not
acquired. If you have not received the username and password, leave these fields empty.
3. Select IP compression and Data compression to be ON or Off. By default they are set to off.
4. Click the Save button to save the new settings.
5. Press the Connect button to connect to Internet. The Device Info for 3G network box in the WUI Basic
screen should indicate an active connection, as shown below. The 3G and Internet LEDs on the front
panel of the Router should also be blinking.
.
If the LEDs are off, then either your profile settings are incorrect, the SIM card is not working or the service
network is unavailable. In either case, contact Technical Support for further instructions.
NOTE: If the LEDs light in an on/off pattern moving from left to right this indicates that your SIM is PIN Locked, please see
PIN Lock Off on page 16 for instruction on how to fix this
Settings