User guide

12
Etisalat HSPA WiFi Router USER GUIDE
STATIC IP Mode
To configure your Router manually, your PC must have a static IP address within the Router’s subnet. The
following steps show how to configure your PC IP address using subnet 192.168.1.x. The following assumes you
are running Windows Vista.
1: From Control panel select the Network and sharing center, open Local Area Connection (You may also
access this screen by double-clicking the Local Area Connection icon on your taskbar). Click the Properties
button.
2: Select Internet Protocol (TCP/IPv4) and click the Properties button. The screen should now display as below.
Choose an IP address between 192.168.1.2 – 192.168.1.254
NOTE: The IP address of the Router is 192.168.1.1. (default), so the PC must be set with a different IP. In the case
below, the PC’s IP address is set as 192.168.1.2
3: Set the Router and DNS server field to 192.168.1.1 (The Router’s IP address).
3. Click OK to apply the settings.
2.3 Login Procedure
To login to the web interface, follow the steps below:
NOTE: The default settings can be found in 3.1 Default Settings.
1: Open a web browser and enter the default IP address for the Router in the Web address field. In this
case http://192.168.1.1
NOTE: For remote access, use the WAN IP address shown on the WUI Homepage screen and login with remote username and
password.
2: A dialog box will appear, as illustrated below. Enter the default username and password, as defined in
section 2.1 Default Settings.
Click OK to continue.
NOTE: The login password can be changed later (see 6.2.3 Passwords)
3: After successfully logging in for the first time, you will reach this screen.
Web User Interface