User guide

22
Etisalat Travel Router USER GUIDE
Wireless
WPS
WPS i s the simplest w a y to establish a connection between wireless clients and your Travel
Router. This method removes the need to manually select the e n c r y p t i o n m o d e and fill in
the passphrase. Yo u o n l y need to pre s s a button on both wire l e s s client and wire l e s s router,
and WPS will do the rest for you. The wireless router supports two types of WPS:
Name Description
WPS via Push Button You have to push a specific button on the wireless client or in your wireless client utility to
start the WPS mode, and switch the wireless router to WPS mode. You can simply push the
WPS button of the wireless router, or click the ‘Start Process’ button in the web configuration
interface
WPS via PIN code You have to know the PIN code of the wireless client and switch it to WPS mode, then input the
wireless client PIN to the wireless router web interface.
Name Description
WPS: Use the dropbox to either enable or disable the WPS function.
WPS Current Status: If the wireless security (encryption) function of this wireless router is properly set, you will see a
‘Success’ message here. Otherwise, you will see ‘Idle’.
WPS SSID: This is the network broadcast name (SSID) of the router.
WPS Auth Mode: It shows the active authentication mode for the wireless connection.
WPS PIN:
This is the WPS PIN code of the wireless router. You may need this information when connecting
to other WPS-enabled wireless devices.
WPS Mode: Select either PIN or PBC.
Station List
The Station List shows the wireless clients currently associated with your Travel Router.