User guide

17
Etisalat Travel Router USER GUIDE
Advanced
Advanced Routing
This page allows you to configure static and dynamic routing rules for your Travel Router.
ADVANCED ROUTING – STAT IC
Static Routing allows computers that a re connected to your Travel R o u t e r t o communicate
with co m p u t e rs on an o t h e r L A N segment which are connected to it via another ro u t e r. To
set a rule, you need to specify the following:
• Destination
• Netmask (if applicable - select the “Net” range as the route type)
• Gateway
• Interface
ADVANCED ROUTING – DYNAMIC
Dynamic Routing uses the RIP p rotocol to allow the Tra v e l Router to adapt to changes in
the n e t w o r k . RIP e n a b l e s the d e v i c e to d e t e r m i n e the best route fo r each p a c k e t based o n
the “ h o p count” or n u m b e r of hops between Sourc e and Destination. To e n a b l e Dynamic
Routing, select Enable from the dropbox and click Apply.
DHCP Client
This page allows you to view the current DHCP clients connected to your Travel Router.