User guide

15
Etisalat Travel Router USER GUIDE
Advanced
PPPOE (ADSL)
Most ADSL services use the PPP o v e r E t h e r n e t p rotocol. Use
this if yo u connect yo u r Travel Router to a br i d g e d ADSL
modem.
Name Description
Username/Password Type in your PPPoE account username and password.
Operation Mode; There are 3 options:
‘Keep Alive’ Keeps the Internet connection alive, does not
disconnect.
‘On Demand’ Only connects to the Internet when there’s a connect
attempt
‘Manual’ Only connects to the Internet when the ‘Connect’
button on this page is pressed, and disconnects when
the ‘Disconnect’ button is pressed.
MAC Clone Please input the MAC address of your computer here
if your service provider only permits computers with
a certain MAC address to access the Internet. If you
are using the computer which used to connect to the
Internet via cable modem, you can simply press the
‘Default’ button to fill the MAC address field with the
MAC address of your computer.
NAT Configuration Allows you to enable or disable network address
translation (NAT) for this WAN connection type
Click Apply to save the settings.
PPTP
PPTP (Point t o Point Tunneling Protocol) allows f o r a s e c u re
connection over the Internet by simply di a l i n g i n a l o c a l
point provided b y your ISP. The f o l l o w i n g screen allows
client PCs to establish a normal P P T P session and p rovides
hassle-free configura t i o n of the PP T P client on each client
PC.
Name Description
Server IP address: Type in the server IP address assigned by your PPTP
Provider.
PPTP Account/
Password:
Type in the username and password assigned by your
PPTP provider.
Address Mode: Select Dynamic if your service uses a DHCP server, or
select Static and type in the IP address, Subnet Mask
and Default Gateway assigned by your Internet Service
Provider.
Operation Mode; There are 3 options:
‘Keep Alive’ -
Keeps the Internet connection alive, does not disconnect.
‘On Demand’ - Only connects to the Internet when there’s a connect
attempt
‘Manual’ - Only connects to the Internet when the ‘Connect’ button
on this page is pressed, and disconnects when the
‘Disconnect button is pressed.
MAC Clone: Please input the MAC address of your computer here,
if your service provider only permits computers with a
certain MAC address to access Internet. If you’re using
the computer which used to connect to Internet via cable
modem, you can simply press ‘Fill My MAC’ button to
fill the MAC address field with the MAC address of your
computer.
NAT Configuration Allows you to enable or disable network address
translation (NAT) for this WAN connection type
Click Apply to save the settings.