User`s guide

HTML SET UP & DIAGNOSTIC
Page 60 User’s guide ref 9014809-03 Failsafe ring SHDSL switch
17.5 « Unitelway » gateway
The unitelway gateway is made to connect an RS232-RS485 unitelway
master PLC to an IP network.
• Select the Unitelway menu; select "enable the unitelway transceiver".
• Enter the XWAY address assigned to the asynchronous unitelway
PLC on the IP network.
• Select « enable the IP-RS transceiver ».
• Enter the Xway address of the master PLC and, if they exist, the
Xway addresses of the slave unitelway PLCs connected to the master
PLC.