User`s guide

HTML SET UP & DIAGNOSTIC
Page 46 User’s guide ref 9014809-03 Failsafe ring SHDSL switch
16 SNMP set up
The XSRING is compliant with the MIB2.
The SNMP manager can acquire the status (Connected or not connected)
of each SHDSL port.
The XSRING is also able to send SNMP traps
when each SHDSL connection is established.
or when each SHDSL connection is disconnected.
To enable the SNMP traps function,
• Select the “Alarm” menu and then the “SNMP” menu :
• Select the “Activation” checkbox.
• Enter the IP address of the management system.
• Enter the Sysname value (for instance XSRING).
• Enter the Syslocation value (for instance the label of the site where
the XSRING is installed).
• Enable the traps related to the different events :
Product startup
SHDSL connection
SHDSL disconnection