User`s guide

HTML SET UP & DIAGNOSTIC
Page 42 User’s guide ref 9014809-03 Failsafe ring SHDSL switch
“Tag” port
An Ethernet port must be set up as a “Tag” port, when the device
connected to that port tags the Ethernet frames by itself.
Ethernet frames entering the port are transmitted towards the SHDSL
network or other ports only if they are tagged with one of the four VLAN ID
codes registered by the XSRING.
Reciprocally, Ethernet frames coming from the SHDSL network or from
other ports of the XSRING can be transmitted to the port only if they are
tagged with the right VLAN ID code.
They are not untagged by the XSRING.
“All access” port
Don’t use that value
14.2 VLAN set up
• Select the “Ethernet” menu and then the “VLAN” menu.
• Enter the four VLAN Id codes in the first column (1 to 4096)
• Assign a VLAN Id to each Ethernet port.
• Assign a VLAN Id to the html server.
• Assign a VLAN Id to the serial gateway.
• Assign the type of VLAN to each port (Untag, Tag, Trunk, All Access).