User`s guide

DIP SWITCHES SET UP
Page 24 User’s guide ref 9014809-03 Failsafe ring SHDSL switch
• Connect a PC to the ring master XSRING and ping periodically a
remote device.
• Disconnect the ring master XSRING from its line 1 and check the
Pings go on receiving a response after the cicatrisation delay.
• Check the failsafe ring led turns red.
• Check the digital alarm output opens.
• Connect the XSRING to its line 1.
• Check the output is closed and the failsafe ring led turns green.
• Do the same with the line Nr 2 of the ring master XSRING.