User`s guide

APPENDIX 2 HTML server
XSRING+ SHDSL switch User’s guide ref 9018809-01
Page 69
Set up
Ethernet & switching
SHDSL ports To configure the SHDSL interfaces
LAN ports To set up the 10/100 ports
RTSP / fail safe ring To set up the failsafe ring
VLANs To set up the VLAN function
MAC address filter To filter destination MAC addresses
IP protocol & routes
IP protocol To enter the IP @ of the unit
RIP To enable the RIP protocol
Static routes To enable IP routing and set the routes
QoS to assign a priority class to each TCP port and IP source @
Alarms
Output command To set up which event drives the digital output
SNMP traps To select the SNMP traps
Static routes To enable IP routing and set the routes
QoS to assign a priority class to each TCP port and IP source @
Security
Administration rights To protect access to the html administration server
System
SNMP traps To select the SNMP traps
Syslog To export the Log to a PC
Devices list To define the machines connected to the LAN ( for QoS only)
Service list To define a list of level 3 protocol and ports number
Date & time To set date and time of the day
IP to RS gateway (XSRING+2220, 2230, BP2220 & BP2230)
Modbus To configure the modbus gateway.
Transparent To configure the raw TCP, raw UDP, multicast & telnet serial gateways
Unitelway To configure the unitelway gateway
Diagnostics
Log
SHDSL ports To configure the SHDSL interfaces
LAN ports To set up the 10/100 ports
RTSP / fail safe ring To set up the failsafe ring
VLANs To set up the VLAN function
MAC address filter To filter destination MAC addresses
Network status
Interfaces To display the status of the SHDSL and Ethernet ports
RTSP status To display the status of the ring
Routes To display the routes
Statistics
Ethernet counters To display the Ethernet counters
SHDSL counters To display the SHDSL G821 counters
Tools To ping a device