User`s guide

MAINTENANCE & DIAGNOSTIC
XSRING+ SHDSL switch User’s guide ref 9018809-01 Page 65
2 Storing the configuration to a file
Once a product has been configured, the parameters file can be stored and restored when necessary.
To store the configuration into a file,
• Select “Maintenance > Configuration management”
• Select the “Current configuration” check box.
• Select the location to store the configuration and give a name to the configuration file.
Attention :
A parameters file can only be downloaded to a product having the same firmware version.
It is why, we advise to assign a name to a parameter file including the product name and the software
version.
Example :
Name of a parameters file for an XSRING+2400 with the firmware version V2.4 :
xSRING+2400_ V241_ siteXYZ
3 restoring the configuration from a file
Restoring a configuration from a file is carried-out in two steps :
Step 1 : Import the configuration file into the User configuration table
• Select “Maintenance > Configuration management”.
• In “the import a configuration from a file” part of the page, click the browse button,
• select the file to import,
• Click the “Import from a file” button,
The file is imported into the “User configuration” table.
Step 2 : Restore the configuration
• In the “User configuration” table, select the configuration to restore,
• Press the “Restore this configuration” button.