User`s guide

SET UP
Page 48 User’s guide ref 9018809-01 XSRING+ SHDSL switch
15.3 Setting up the SNMP traps
To enable the SNMP traps,
• Select “Set up > Alarms > SNMP traps”.
• Select the traps which must be transmitted by the XSRING+
“Product start up – cold start” checkbox:
If that checkbox is selected, a trap is transmitted each time the XSRING+ restarts.
“SHDSL link 1 (or 2 ) connection” checkbox:
If that checkbox is selected, a trap is transmitted each time the shdsl interface 1 (or 2 ) connects.
“SHDSL link 1 (or 2) disconnection” checkbox:
If that checkbox is selected, a trap is transmitted each time the shdsl interface 1 (or 2) connects.