User`s guide

SET UP
XSRING+ SHDSL switch User’s guide ref 9018809-01 Page 41
14.2 Set up
Attention :
Before saving the VLAN configuration, make sure you will be able to access to the administration html
server through an Ethernet port or remotely through the line.
One Ethernet port at least belong to the same VLAN as the administration html server of the
XSRING+.
• Select “Set up > Ethernet & switching > VLAN”.
The VLAN page is displayed.
• Select the “Enable VLANs” checkbox.
That page is divided in three parts :
Egress policy,
Ingress policy.
html server and of the serial gateway.