User`s guide

SET UP
Page 32 User’s guide ref 9018809-01 XSRING+ SHDSL switch
10 Setting up a multidrop or ring SHDSL connection
This chapter describes how to
set up two XSRING+2XXX
when hey are used in a
multidrop (or daisy chain)
network.
10.1 Set up steps
Step 1 : SHDSL Connection set up
To assign the STU-R and STU-C profiles to the SHDSL ports
Step 2 : Connection test and set up adjustment.
10.2 Step 1 : SHDSL connection set up
We advise to connect the SHDSL
port 1 of the first SHDSL switch to
the port 2 of the second switch and to
set them up as displayed on the
drawing.
In that way, the configuration of each
switch can be the same or at least
similar.
XSRING+2XXX XSRING+2XXX
Setting up the XSRING+ (Number 1 or number 2)
• Click Set up > Ethernet &
switching > SHDSL ports.
• Port 1 : Select « Enable »
and assign one connection
profile to the SHDSL port 1
(Standard or Performance or
Endurance or TurboShort)
• Port 2 : Select « Enable »
and assign the SHDSL profile
« STU-R, Auto » to the
SHDSL port 2.
• Click “Save”.