User`s guide

SET UP
Page 28 User’s guide ref 9018809-01 XSRING+ SHDSL switch
6 Recovering a free access to the administration server
Press the push-button, located on the top of the product, is pressed, the default configuration is
temporarily restored.
The IP address of the html server is 192.168.0.128. and accessing to it is free.
Make the necessary modifications and save.
7 Assigning an IP address to the LAN interface
An IP address must be assigned to that interface; the HTML server is located at that IP address.
To assign an IP address to the LAN interface,
• select “Set up > IP protocol and IP routing” > IP protocol”;
• enter the IP address, the netmask and the default gateway address.
If IPV6 must be used,
• select the “Enable IPV6” checkbox;
• enter the V6 IP address of he XSRING+, the netmask and the default gateway address.
8 IP routing and static routes
The SHDSL XSRING+ switch is an Ethernet switch; it works like any usual switch to transmit any
upper level protocol.
It is why, generally, it is not necessary to enable the IP routing function.
However, the IP routing feature can be used in particular cases, to avoid to transfer multicast or
broadcast frames or other traffic towards the SHDSL link.
To make IP routing possible, the network connected to the LAN interface of the XSRING+ must be a
different IP network from the SHDSL IP network and from other networks.
For instance, referring to the drawing below, if the
XSRING+ Nr 1 is used as a router, the IP @ of the network
1 must be different from the IP @ of the SHDSL network
and from network 2
2. Routes must be created or the RIP protocol must be enabled.
A route is a table which registers which gateway address must be used to transfer IP packets to a
particular network.
For instance, referring to the drawing above, if IP packets have to be transmitted from the IP network
1 to the IP network 2, a route has to be created as follows :
Route name : “From NETWK 1 to NETWK 2”
Destination IP addr : “network 2 IP address”
Gateway IP addr : IP02
Remarks :
“Network 2 IP address” is the address of the network Nr 2; for instance 192.168.2.0.
IP02 is the address of the SHDSL interface of the XSRING Nr 2.