User`s guide

SET UP
Page 26 User’s guide ref 9018809-01 XSRING+ SHDSL switch
2 Connecting a PC to the XSRING+ for configuration
2.1 Overview
Administration server address :
The administration html server is located at the LAN IP address of the SHDSL switch (The factory IP address
is192.168.0.128).
First set up :
For the first configuration, we advise to connect the PC directly to the LAN interface of the SHDSL switch..
Further set up modifications :
Modifications can be carried out from the LAN interface, or remotely.
Restoring the factory IP address :
Network IP address :
Later in the text, we often speak of “network IP address”.
We mean the lowest value of the addresses of the network.
For instance, if the netmask of a network is 255.255.255.0, the network IP address of that network is terminated by a zero
(X.Y.Z.0.).
Copy and paste :
Parameters must be entered with the keyboard; they cannot be pasted.
However, it can be useful to paste a string when it is long to avoid errors.
In that case, paste the string, delete the last character of the pasted string, and enter it again with the keyboard.
Saving and restoring the parameters file (see the maintenance chapter)
A parameters file can only be downloaded to a product with the same firmware version. It is why, we advise to assign a name
to a parameter file including the product name and the software version like for instance “my_XSRING2400_file _V241.bin”.
2.2 First configuration
Step 1 : Create or modify the PC IP connection.
Assign to the PC an IP @ in accordance with the WSRING IP address.
For the first configuration, assign or instance 192.168.0.127 to the PC.
Step 2 : Connect the PC directly
to an XSRING+ ethernet interface
using any Ethernet cable (straight
or cross-wired)
Step 3 : Launch the navigator
Enter the LAN IP @ of the SHDSL
switch192.168.0.128.
The Home page of the
administration server is displayed
Note :
If the home page cannot be displayed, refer to paragraph 4 below.