User`s guide

INSTALLATION
XSRING+ SHDSL switch User’s guide ref 9018809-01 Page 23
13.3 By-pass function
To enable the by-pass function, connect the line1 to the “1 by-pass” screw block and the line 2 to the
“2 by-pass” screw block as shown below.
.
14 Input and output
Input
That input is not isolated.
if it is opened, an SNMP trap will be sent to the SNMP server is that function has been enabled.
Alarm output
1 relay output is provided to indicate
an alarm.
The alarm condition can be
selected using the html server.
The Output is open when the
XSRING is switched OFF or when
the SHDSL line is not connected.
F+ F-
7
8
Digital output
+
-
V < 48 VDC
I < 0,5 A
3V3
In
5
6
Digital input
I max = 0,5 A
V