User`s guide

Configuration
Page 44 User’s guide ref 9014709-01 XSLAN shdsl switch
4.8 Diagnostic menu
?? Logs :
The log displays the last 300 dated events : ethernet & shdsl connections
and disconnections, power on, RS232 gateway events.
?? Network status :
That page displays detailed information about each interface of the
XSLAN (SHDSL 1 & 2, ethernet, RS232-RS485).
The SHDSL alinea shows the status of each shdsl interface :
Data rate
Connection status : Connected / connection in progress / disconnected)
Quality level of the connection from 1 to 5 : The quality level has to be at least 3.
The Show statistics button displays a page providing detailed technical
information about each shdsl link quality.
?? Microswitches status :
That screen displays the status of the microswitches located on the top of
the product.
?? Ping :
That screen enables to send a ping frame to an IP address.
IO control
That screen displays the status of the digital input and output and allows to
set ON or OFF the alarm digital output.
4.9 Alarm menu
That page allow to configure SNMP traps, the alarm email and the event
which causes the output to open (alarm status).