User`s guide

Configuration
XSLAN shdsl switch User’s guide ref 9014709-01 Page 39
4.7.2.2 "Raw server" gateway
That gateway can be used if a serial slave device has to answer requests
coming from devices located on the IP network and acting like a master
(also called TCP client).
To configure the “raw server” gateway,
?? Select the “transparent” and then the “raw server” menus.
?? Enable the raw server gateway and set up the parameters as follows :
“RS232/485 input buffer size” parameter
Set up the maximum length of an asynchronous string the gateway will
store before transmitting it to the IP network.
“Timeout of RS232/485 end of frame” parameter
Set up the delay the gateway will wait before declaring complete a string
received from the asynchronous device.
Once declared complete, the gateway will transmit the string to the IP
network.
“TCP inactivity Timeout” parameter
Set up the time the gateway will wait before disconnecting the TCP link if
no characters are detected.