User`s guide

Configuration
Page 38 User’s guide ref 9014709-01 XSLAN shdsl switch
To configure the “raw client” gateway,
?? Select the “transparent” and then the “raw client” menus.
?? Enable the raw client gateway; and set up the parameters as follows :
“RS232/485 input buffer size” parameter
Set up the maximum length of an asynchronous string the gateway will
store before transmitting it to the IP network.
“Timeout of RS232/485 end of frame” parameter
Set up the delay the gateway will wait before declaring complete a string
received from the asynchronous device.
Once declared complete, the gateway will transmit the string to the IP
network.
“TCP inactivity Timeout” parameter
Set the time the gateway will wait before disconnecting the TCP link once
characters are no longer detected.
“TCP port number” parameter
Set the port number the gateway has to use.
“Raw server IP address” parameter
The raw client gateway is able to communicate with a raw server gateway.
Assign an IP address to define the destination gateway.