User`s guide

Configuration
Page 28 User’s guide ref 9014709-01 XSLAN shdsl switch
4.3 System configuration menu
4.3.1 Administration rights menu
The « administration rights » menu allows to restrict access to the
administration server from the LAN,
Attention : If you don’t remember this login & or password, you can
restore a free access to the html server and, at the same time the factory
IP address by setting SW01 ON and SW2 OFF.
4.3.2 Target list menu
This menu allows to define the IP addresses of the machines belonging to
the network.
That list has to be entered if you wish to use the Quality of Service
function.
4.3.3 Save / restore menu
That menu allows to store the configuration file in a PC hard disk or to
download a stored file to the XSLAN.
4.3.4 Reboot Menu
To restart the unit.
4.4 Ethernet & switching menu
4.4.1 SHDSL port
Mode parameter
When 2 XSLAN switches are
connected to one another through a
line, one has to be configured as an
LTU (master party) and the other as
an “NTU”. (slave party).
The switch which is named “LTU”
negotiates and forces the data rate
over the line; the NTU can only
accept.