User guide

APPENDIX 1
Management web server
UMTS GPRS EDGE router ref. RAS-3G User guide ref. 9020009-01 Page 87
1/ Setup menu
Remote users To assign an ID and PWD to each authorized user and set their rights
To set the M2Me service
LAN interface To enter the IP @ of the router on the LAN interface.
To enter the IP @ assigned to the remote users
To set up the Ethernet interfaces
To set up the DHCP server on the LAN interface
WAN interface To enter the IP @ of the router over the WAN interface.
Network To configures the VPNs
To enter static routes and enable the RIP protocol
To set up the VRRP redundancy protocol
To set up port forwarding
To set up advanced Ip addr. translation functions
Security To set the firewall rules (User filter and main filter)
To add a certificate
To restrict access to the administration server
Alarm To set up alarm SNMP traps
To set up alarm emails
Serial gateway To set up the modbus gateway (client / server)
To set up the Unitelway gateway
To set up the RAW TCP / RAW UDP / TELNET gateways
System To set up SNMP parameters
To enter the devices list
To update the service list
To update time and date
2/ Diagnostic menu
Log To display the events ( VPN connections, user connections..)
Network status Interfaces status : @ MAC, @IP, ADSL, VPN
VPN status
Routing tables
M2Me_Connect status
Serial gateways To display the status of each gateway (COM1 and COM2)
Tools To send Pings from the router
Hardware To display the input status
To control the output
To display the DIP switches status
Environment To display the internal T° and the supply voltage
Advanced To store the internal report to a disk for diagnostic purposes
3/ Maintenance menu
Firmware update To update the firmware
Save / restore To save or restore a configuration file
To restore the factory configuration
Reboot To restart he router
4/ About menu
To display the certificate “product key”
To display the firmware version