User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
DIAGNOSTIC & MAINTENANCE
UMTS GPRS EDGE router ref. RAS-3G User guide ref. 9020009-01
Page 83
1 Diagnostic menu
The html server provides extended diagnostic functions.
Select the Diagnostic menu and then the appropriate sub-menu.
• Log sub-menu:
The log displays the last 300 dated events :
3G, VPN and users connections and disconnections,
power on,
Serial gateway events.
• Network status sub-menu and then status sub-menu :
That screen displays the current status of the LAN interfaces and of the WAN (3G) connection :
LAN interfaces :
That part of the page shows the data of the LAN interface :
MAC address,
Ethernet mode (10 /100, half or full),
IP address.
WAN interface (3G-GPRS-EDGE) :
3G signal strength
:
It must be better than – 90 dBm to en
Remark : A s the number is negative, -85 dBm is better than –90 dBm for instance.
State
: Connected or not to the 3G network
Local IP address
:
It is the IP address assigned by the provider to the « antenna » (WA interface) over the 3G
network.
In other words, it is the PPP client IP address.
Remote IP address
:
It is the IP address of the PPP server belonging to the 3G network.
• VPN sub-menu
That menu displays the table of the VPN (remote user connections and remote routers connections)
which are established.