User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
SET UP
Alarm launched on event
:
If the option OPEN is selected, the alarm will be sent each time the digital input will be opened.
If the option CLOSED is selected, the alarm will be sent each time the digital input will be opened.
If the option BOTH is selected, the alarm will be sent each time the digital input will be opened or
closed.
Hold time :
Select the time the input has to stay in its alarm state to be taken into account.
Alarm destination
:
Select the user to whom the email must be sent.
Text to send
:
Enter the email text.
23.3 Configuring the web portal
The web portal in an html page; it displays a list of devices connected to the LAN. Each line of the list
is made of the device name, its IP address and three links :
The html link : To go directly to the web server of the associated machine.
The « explore » link : To explore the HD of the associated machine, if it is a Windows machine.
The « ftp » link : To explore the files of the associated device.
If the we portal option has been selected (see below), the web portal page is displayed when the
remote user launches the navigator and enters the Ip address assigned to the RAS-3G router. In that
case, the administration server, usually can be displayed at the same address but at the port number
8080 instead of 80 when the web portal page option is not selected.
UMTS GPRS EDGE router ref. RAS-3G User guide ref. 9020009-01
Page 81