User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
SET UP
Page 80 User guide ref 9020009-01 UMTS GPRS EDGE router ref. RAS-3G
23 Advanced functions
23.1 Adding a certificate
Coming from the factory, the RAS-3G router includes a certificate delivered by ETIC
TELECOOMUNICATIONS acting as a certification authority.
That certificate can be used to set a VPN between two routers.
Two RAS-3G routers can set a VPN with one another using certificates only if the certificates have
been provided by the same authority.
Additional X509 certificates, provided by ETIC Telecommunications or not, can be downloaded into
the router.
To import a new certificate, the file extension can be PKCS#12 with a password or PEM.
Even if more than one certificate have been downloaded into the RAS-3G router, one certificate can
be used for all the connections.
23.2 Alarms
23.2.1 SNMP
The RAS-3G router is able to send snmp traps when alarms occur.
Activation
:
If that option is selected, the router will send an SNMP trap if an alarm is detected.
SNMP network management IP address :
Enter the IP address of the management platform
SysName
& SysLocation :
That fields allow to identify the source device.
Example :
Sysname : etic
Syslocation : France
Product start-up
:
If that option is selected, the router will send an SNMP trap each time it will connect to the Internet
23.2.2 Digital output alarm
If an alarm occurs, the router will open the digital output..
The causes which make the output to open cane be either the
ADSL disconnection, power input 1 failure, power input 2 failure.
23.2.3 E-mail alarm
When the digital input is closed or opened, an email can be transmitted to one of the users of the
users list.
To set that function select the “Alarm” menu and click “email”.
Enable the alarm email
:
Select this option if you want an email to be sent to a user when the digital input 1 is set ON or OFF.