User guide

ManualsBrandsETIC ManualsComputer equipment1400

Table Of Contents

1 Security recommendations
2 CERTIFICATE OF CONFORMITY
3 Products identification
4 Data-sheet
5 Product overview
- 5.1 Functions overview
- 5.2 Main features
1 Dimensions
2 Connectors
3 Led indicators
4 DIP switches
5 Factory default push-button
6 Mounting the product on a DIN rail or removing it
7 Cooling
8 RS232 interface
9 RS485 interface
10 Digital input and output
11 Connecting the antenna
12 Installing the SIM card
Set up steps
2 Connecting a PC to the router for configuration
- 2.1 Overview
- 2.2 First configuration
- 2.3 Modifying the configuration from the LAN
- 2.4 Modifying the configuration remotely
3 Rebooting the router after parameters changes
4 Recovering the factory LAN IP address
5 Recovering the factory configuration
6 Restricting access to the administration server
7 Recovering a free access to the administration server
8 Factory configuration
9 LAN interface set up
- 9.1 IP protocol
- 9.2 DHCP server
10 UMTS – GSM-GPRS-3GDGE interface set up
- 10.1 Modem menu
- 10.2 Connection menu
- 10.3 “Control” menu
11 Setting up the DynDNS service
12 Creating VPN connections between routers
- 12.1 Principles
- 12.2 IPSec VPN connections
- 12.3 TLS VPN connections
13 Routing functions
- 13.1 Basic routing function
- 13.2 Static routes
- 13.3 RIP protocol
14 Address and port translation
- 14.1 Port forwarding
- 14.2 Advanced network address and port translation
  - 14.2.1 Principle
  - 14.2.2 Configuration
15 VRRP redundancy
- 15.1 Principle
- 15.2 Configuring VRRP on the LAN interface
- 15.3 Configuring VRRP on the WAN interface
16 Remote users connections service
17 Remote users connections
- 17.1 Principles
- 17.2 Configuring a TLS connection
- 17.3 Configuring a PPTP connection
18 M2Me_Connect service
- 18.1 Overview
- 18.2 Configuring a M2Me_Connect connection
19 Users list
20 Firewall
- 20.1 Overview
- 20.2 Main filter
  - 20.2.1 Main filter Overview
  - 20.2.2 Configuring the main filter
- 20.3 Remote users filters
21 Serial to IP gateway
- 21.1 Modbus menu
  - 21.1.1 Modbus server gateway
  - 21.1.2 Modbus client gateway
- 21.2 RAW TCP gateway
  - 21.2.1 Raw client gateway
  - 21.2.2 Raw server gateway
- 21.3 RAW UDP gateway
  - 21.3.1 Overview
  - 21.3.2 Configuration
22 USB to IP gateway
- 22.1 Principles
- 22.2 Configuration
23 Advanced functions
- 23.1 Adding a certificate
- 23.2 Alarms
- 23.3 Configuring the web portal
- 23.4 Configuring the DNS server
1 Diagnostic menu
2 Saving the configuration to a file
3 Updating the firmware
Signets Word
- OLE_LINK1
- OLE_LINK8

SET UP

Step 3 : Build a remote user filter

• Select the « security» menu, then « firewall» and then «Filter list» The users filters list is

displayed.

• Click « add a new filter ».

UMTS GPRS EDGE router ref. RAS-3G User guide ref. 9020009-01 Page 71