User guide

Table Of Contents
SET UP
Step 1 : Complete, if necessary, the list of services
Remark : The main services (html, ftp, modbus) are available from factory; for that reason, most of the
time, that step can be skipped.
Select the menu “system” and then “service list” The list of TCP ports is displayed.
Click « add a service ».
Enter the label of that the new service, assign a protocol (udp, tcp, icmp) and a port number.
Save. The list is updated.
Step 2 : Enter the list of devices of the LAN network
Select the «System» menu, then «Devices list».
The list of the devices of the LAN network is displayed.
Click « add a device ».
Assign a label and an IP address to the device and click OK.
Page 70 User guide ref 9020009-01 UMTS GPRS EDGE router ref. RAS-3G