User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
PRODUCT OVERVIEW
UMTS GPRS EDGE router ref. RAS-3G User guide ref. 9020009-01
Page 7
1 Security recommendations
The RAS-3G is a low power radio transmission and reception device. It conforms to rules imposed to
UMTS or GSM-GPRS-EDGE terminals.
Check that using such a device is authorized at the location where you wish to install the router.
Do not use the RAS-3G router in locations with a potentially explosive atmosphere like, for instance,
petrol stations or areas where the atmosphere contains chemicals or particles.
The RAS-3G uses the UMTS radio network and wireless waves. It is why, it is not possible to
guarantee it will connect without interruption.
It is not possible to rely only
the RAS-3G and the UMTS network to guarantee the security of an
automated system.