User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
SET UP
To add a user form
• Click the “add a user ” button
“ Active (value Yes or NO)
” :
Select “No” if you want to prevent the user to access the network.
Select “yes” to authorize the user to access the network.
Full name
:
It is the name displayed in the user list.
Login
& password
The login and the password will have to be entered by each user at the beginning of the remote
connection.
E-mail
:
The RAS-3G will send an email to that address in two situations :
Alarm email : the RAS-3G sends an alarm email to the defined user If the input 1 is closed or opened
(if that option has been set).
Internet connection email : Once connected to the Internet, the RAS-3G will send to the demanding
user an email containing the dynamic IP @ assigned to the RAS-3G by the provider. (See
OPERATION chapter).
Firewall filter
:
Select a filter in the list.
A filter defines a domain of the local network.
Thus, once assigned to a user, a filter limits his or her access rights.
UMTS GPRS EDGE router ref. RAS-3G User guide ref. 9020009-01
Page 65