User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word

SET UP
19 Users list
Storing at least an authorized user in the users list is necessary if a remote user wishes to connect to
the RAS-3G with a PPTP or a TLS or a L2TP/IPSec remote user connection.
The users list registers 25 authorised remote users forms.
Each user form stores the identity of the user (Login and password), his email address to send alarm
emails and the filter assigned to him.
To display the user list,
• select the “Setup” menu, the “Remote users” menu and then the “User list” menu.
Attention :
Coming from factory, a default user is registered; his login is admin
and the password is also admin.
After the test phase, we advise to modify these login and password.
Page 64 User guide ref 9020009-01 UMTS GPRS EDGE router ref. RAS-3G