User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
SET UP
18 M2Me_Connect service
This function is available in RAS-3G-1400, RAS-3G-1201, RAS-3G-1220, RAS-3G-1230 routers only.
18.1 Overview
The M2Me_Connect service simplifies the connection of a remote PC to a machine through the
Internet.
It provides a solution when a direct PPTP or TLS connection described before shows itself impossible
in particular when the IP address assigned by the provider to the RAS-3G antenna (WAN interface) is
not a public IP address.
The M2Me_Connect service solves that difficulty :
The PC does not connect directly to the RAS-3G; both the PC and the router connect to the
“M2Me_Connect” service.
Once both parties have been authenticated by the M2Me_Connect service with their own certificate, a
TLS VPN is set from end to end from the PC to the RAS-3G router.
The remote user identity is checked by the router to verify he or she belongs to the user list stored in
the RAS-3G router.
Finally, individual access rights are assigned to the remote user depending on his or her identity.
Page 62 User guide ref 9020009-01 UMTS GPRS EDGE router ref. RAS-3G